TW001GZ - 40V Max Brushless 3/4" High Torque Impact Wrench
The 40V Max. Brushless ¾” Impact Wrench delivers 1,800Nm of fastening torque and 2,050Nm nut busting torque for unmatched fastening performance. Featuring high durability construction the battery housing is
protected by a battery vibration suppression system. This system protects the battery from damage due to excess vibration caused during heavy duty fastening applications. In addition to the power of the TW001G it is also highly intelligent with 6 optimised fastening controls each mode tailors the driver speed and impact rate to the task at hand, ensuring you don’t damage the fastener or material.
GA013GZ - 40V Max Brushless 125mm (5") Paddle Switch Angle Grinder
The 40V Max. Brushless 125mm (5”) Paddle Switch Angle Grinder delivers cutting speeds up to 40% faster than the 18V equivalent. Re-designed to withstand harsh conditions the GA013G is highly durable with advanced protection against heat and dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart and an electric brake that will rapidly stop the wheel rotation for safe user operation.
DGP180ZBK - 18V Grease Gun
The DGP180 is an industrial application solution, providing efficient grease lubrication for a wide range of applications. Featuring a maximum 10,000psi discharge pressure and 295mL/min discharge rate, with a 1,200mm long flexible hose enabling access to hard to reach and tight spaces. The DGP180 also features an automatic pressure switching function which maintains a steady flow rate regardless of the pressure of the application at hand. The DGP180 is also equipped with convenient features such as a variable speed trigger for control over grease flow rate, and a LED job light with a manual Off and On switch.
DC40RA - 40V Max Single Port Rapid Charger
XGT is a new battery system with its own Tools, batteries and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users Optimum power supply & Optimum charging. The XGT range of tools and batteries come with built-in programming, providing digital communication between the battery and the tool. Allowing not only the battery to talk to the tool but also the tool to talk to the battery. Creating optimum synergy between the battery and motor producing optimum performance.
BL4040 x2 - 40V Max 4.0Ah Batteries
ADP10 - 18V Charging Adaptor (Chargers 18V LXT batteries on the DC40RA)
832319-7 - Tote Bag
BONUS - BL1830 - 18V 3.0Ah Battery
The 40V Max. Brushless ¾” Impact Wrench delivers 1,800Nm of fastening torque and 2,050Nm nut busting torque for unmatched fastening performance. Featuring high durability construction the battery housing is
protected by a battery vibration suppression system. This system protects the battery from damage due to excess vibration caused during heavy duty fastening applications. In addition to the power of the TW001G it is also highly intelligent with 6 optimised fastening controls each mode tailors the driver speed and impact rate to the task at hand, ensuring you don’t damage the fastener or material.
- Heavy duty power with 2,050Nm nut busting torque
- High durability construction with battery vibration suppression protecting the battery
- Optimised application selector with 6 modes adapting speed and impacts for each task
- Full speed mode shortens the distance of trigger travel required to hit full speed
- 4 Stage power selection for optimum rpm and fastening torque
GA013GZ - 40V Max Brushless 125mm (5") Paddle Switch Angle Grinder
The 40V Max. Brushless 125mm (5”) Paddle Switch Angle Grinder delivers cutting speeds up to 40% faster than the 18V equivalent. Re-designed to withstand harsh conditions the GA013G is highly durable with advanced protection against heat and dust. The improved heat dissipation capacity allows for continuous heavy duty operation. In addition there are a number of enhanced safety features including Active Feedback Sensors that will shut down the tool in the event of kickback. As well as soft start, anti-restart and an electric brake that will rapidly stop the wheel rotation for safe user operation.
- Heavy duty power cutting 40% faster than the 18V equivalent model
- High durability with advanced protection against heat and dust
- Active feedback sensors shut down the tool in the event of a kickback
- Enhanced safety features including an electric brake, soft start and anti-restart
- Improved heat dissipation capacity allows for continuous heavy duty use
DGP180ZBK - 18V Grease Gun
The DGP180 is an industrial application solution, providing efficient grease lubrication for a wide range of applications. Featuring a maximum 10,000psi discharge pressure and 295mL/min discharge rate, with a 1,200mm long flexible hose enabling access to hard to reach and tight spaces. The DGP180 also features an automatic pressure switching function which maintains a steady flow rate regardless of the pressure of the application at hand. The DGP180 is also equipped with convenient features such as a variable speed trigger for control over grease flow rate, and a LED job light with a manual Off and On switch.
- Automatic pressure switching function maintains steady flow rate regardless of pressure
- 1,200mm flexible hose length for access to hard to reach places
- Maximum 10,000psi discharge pressure and 290mL/min discharge rate
- Variable speed trigger for control over grease flow rate
- LED job light with manual on and off switch
DC40RA - 40V Max Single Port Rapid Charger
XGT is a new battery system with its own Tools, batteries and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users Optimum power supply & Optimum charging. The XGT range of tools and batteries come with built-in programming, providing digital communication between the battery and the tool. Allowing not only the battery to talk to the tool but also the tool to talk to the battery. Creating optimum synergy between the battery and motor producing optimum performance.
- Rapid charging system communicates data between battery and charger for optimum charging
- Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
- Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
- Large charging status indicator light & selectable full charge melody
BL4040 x2 - 40V Max 4.0Ah Batteries
- Digital communication between the tool & battery for optimised performance
- Heavy duty cell casing significantly improves the batteries impact resistance
- Battery ventilation system maximises battery life
- Short circuit prevention structure protects terminals from dust and moisture
- 3-layer moisture protection shields cells from water ingress
ADP10 - 18V Charging Adaptor (Chargers 18V LXT batteries on the DC40RA)
- Adapts to DC40RA for rapid charging of 18V LXT batteries
- Rapid charge an 18V 6.0Ah battery in 40mins
832319-7 - Tote Bag
BONUS - BL1830 - 18V 3.0Ah Battery
- Fuel gauge indicator, displays charge remaining on battery in four stages
- Built in memory chip communicates the usage history with the charger
- Built in shock absorbers protect the cells from job site conditions
- High energy cells pack more power per cell to reduce the number of cells and overall weight
- Large release button for easy removal from the tool
- Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
- 16 contact terminals provide consistent power and firm hold in any environment
