Design Pine is a dressed treated pine, which is finger jointed or laminated for increased dimensional stability. There are four key components to the Design Pine product; the timber, the preservative, the glue system and the primer system. Design Pine is manufactured from plantation grown radiata pine. Through the manufacturing process, all the natural decfects which may comprimise the stability of the length are removed. These lengths are then finger jointed back together to produce a clear, straight, defect free board. All products in the Design Pine range are subject to Light Organic Solvent Preservative (LOSP) and are rated to a H3 (hazard level 3) for all above ground applications.

Applications:
Pergolas, Verandahs, Balustrades & Carports

Design Pine Dressed

Sizes:

Width (mm) Thickness (mm)
42 18
66 18
90 18
138 18
185 18
230 18
280 18
30 30
42 30
66 30
90 30
138 30
185 30
230 30
42 42
66 42
90 42
138 42
185 42
230 42
280 42
88 88
112 112
135 135

Please note: Not all stores carry a full range of timbers and claddings. Please get in touch with your local store for current stock or to get a quote.