Beaver Lever Blocks Model 3S (250kg and 500kg)
Supplied by Bunzl Brands and Operations Pty Ltd from 1 January 2019 to 19 August 2021. Affected batch numbers: BJT0201; BJT0207; BJT0208; BJT2878; BJT2879; BJT2880; BJT2881; BJT4451.
Defect: Ball Bearings could be missing from the bearing in the Top Hook Assembly, which could cause the top hook to dislodge while load is suspended.
Hazard: If the hook detaches and the load falls, there is the risk of serious injury to the user and bystanders.
What to do: Consumers should immediately stop using the product and check the batch number on the ID plate against the list of affected batch numbers. If the lever block is from one of the batches detailed above either take the product to the nearest Beaver Brands approved testing facility for testing or contact Beaver Brands to make arrangements to return the product for testing.
Product that passes testing will be returned at no cost. A refund or replacement will be provided for product that fails testing.
Product bearing a QC Passed sticker is not affected by this recall.
Contact Details: For further information, please contact Beaver Brands by phone on 02 8882 5838, by email on email@example.com or visit the website at www.beaver.com.au
CHEMTECH® CLEAN & EASY MOULD & MILDEW KILLER RANGE - BC36RTU-750M and BC36-950M
ITW has initiated an immediate recall of the Chemtech Clean & Easy Mould & Mildew Killer trigger pack 750 ML and the Chemtech Clean & Easy Mould & Mildew Killer 950 ML due to the potential of leaks from the cap.
Notice of Product Safety Recall from August 2020
GRILLMAN Gas Safety Shut-Off Valve AND GRILLMAN Gas Safety Shut-Off Valve with Hose and Regulator
Gas safety Shut Off Valve with POL flitting, suitable for gas barbecues and outdoor gas heaters. Batches GMGSG 2018/01 and GMGSG 2018/03 Sold by caravan, camping, hardware, barbecue and outdoor furnishing stores between March 6th 2018 to July 31st 2020.
The tail pipe and main body of the valve may come apart, this may cause the seal at this point to break and allow gas to escape when the valve to the gas cylinder is open.
Risk of leaking gas igniting, leading to burns and/or a fire and/or explosion, which may result in serious injury or death.
Consumers should immediately stop using the products and return them to the place of purchase for a full refund. CONTACT DETAILS: For further information, contact Mayo Hardware on 1300 360 211 or email firstname.lastname@example.org See www.productsafety.gov.au for Australian product recall information
Notice of Product Safety Recall from December 2019
Description/ Model Number: Makita Model:
5057KB 185mm Dustless Circular Saw. Affected range of serial numbers:
In the interest of user safety, Makita Australia Pty Ltd is undertaking a safety recall of Makita Circular Saw model 5057KB forreplacement of Saw
When cutting at a 45 degrees angle, the blade cover does not open fully. If it is forced open by the operator the blade cover may become stuck and expose the spinning blade.
An exposed blade during use poses a serious injury risk.What to do: Check model and serial number of your saw (see the illustration below ). If the model and serial number of your saw is within the affected range – stop using the saw immediately.
Contact Makita on 1300361690 between 8am and 5pm weekdays to arrange repair by the nearest Makita Service Agent at no charge.Makita has been directed to request that this recall notice and information is placed on your website for 6 months.Link to
Notice of Product Safety Recall from January 2015
A product safety recall of the product below was advertised on28 January 2015. It is reproduced again to bring to the attention of consumers as requested by the ACCC.
Description/ Model Number:
MIPRO 1.8M DUAL PURPOSE ALUMINIUM LADDERAPN/
As a precaution, Mitre 10 is conducting a recall for this product sold exclusively in Mitre 10 and True Value Hardware stores nationallyprior to 28 January 2015.
Labelling on the ladder indicates that the Ladder complies with AS/NZS 1892.A test indicates that the ladder does not comply with that Australian Standard.
The ladder may not have the attributes required by the Australian Standard with which it purports to comply, including safety attributes.
What To Do:
We recommend that customers cease use of the ladder immediately and return it to their local Mitre 10 or True Value Hardware store for a full refund of the purchase price. A similar ladder sold after the above date with a yellow coloured top and a different barcode is not the subject of the recall and should not be returned.
Mitre 10 Australia Pty Ltd ACN 009 713 704 of 19 Corporate Drive Heatherton Victoria 3202. Phone: 1300 880 440.www.mitre10.com.au