This Post Kit enables you to install your folding frame clothesline anywhere - not just to the wall. It is ideal if you have a restricted wall space or an unsuitable mounting surface. Once installed according to Hills mounting instructions, this post kit can sit at a maximum height of 1.9m from the ground. We back this product to stand the test of time with Hills Lifetime Warranty.
SKU
7265739
Sturdy legs made from thick galvanised and powder-coated steel
Compatible with Hills Single, Double and Compact Folding Frame Clotheslines
Flexible installation height
All fixings for attaching the clothesline included
Colour matched to COLORBOND® colours
Post Kit Folding Monument 2.4M Hills
WishlistProduct Details
Specifications
Product Identifiers
- SKU
- 7265739
- APN / GTIN / UPC
- 9312620155161
- Product Code
- 80155161
Product Dimensions
- Height (mm)
- 2400mm
- Width (mm)
- 250
- Depth (mm)
- 250
- Weight (kg)
- 8.7
Product Details
- Brand
- Hills
Battery
- Battery Included
- No
- Battery Required
- 0
- Skin Only
- No
Warranty & Care
- Care Instructions
- Installation Instructions Installing directly into a concrete pad *Note: Check to ensure that all parts are removed from the carton before beginning installation. The accessory pack may be stored within the Post 2.1 Having selected a suitable location, mark out 2x centre marks spaced at 2353mm for the post hole locations. 2.2 Dig two holes 200mm in diameter x 500mm deep. Place approximately 100mm of coarse gravel in the bottom of the hole. *Note: If you wish for the clothesline to sit lower, dig the hole deeper. 2.3 Insert the Posts into the holes - push the base of the Posts approx. 40mm into the gravel. (Figure 4) 2.4 Loosely fasten the Cross Brace to the top holes in each Post, using two MS x 85 socket head bolts and two Nyloc nuts. This is done to ensure alignment and will be removed to include the Folding Bracket after concrete has set for 48 hours. 2.5 Support the posts and using a spirit level and tape measure, check that the Posts are parallel with each other and level - both vertically and horizontally. 2.6 Concrete should be damp enough to hold together when squeezed in your hand. Support the Posts in position and fill the holes with concrete, packing firmly. 2.7 Settle the concrete by pushing a thin stick into the mix several times. 2.8 Slope the surface of the concrete away from each post to provide drainage Use a spirit level and tape measure to check the posts are parallel and level. (Figure 5) *Note: Allow 48 hours for the concrete to set before use.
- Warranty
- Lifetime
Deliveries & Returns
Deliveries
Items sold on the Home Hardware website are delivered from a local Home Hardware store or a supplier partner. Select your delivery suburb or postcode above to see availability and estimated times.
Returns
This Policy is provided by the Home Hardware store participating in this website that has been selected by the customer to buy the particular product/s that are subject to this Policy (Store). The Store is not required to provide a refund or replacement if the customer changes their mind. But the customer can choose a refund or exchange if a product has a major problem. View the Full Return Policy.
What you need to know before purchasing
- Not all stores carry stock of this product, but will order it in for you subject to availability and where local laws permit.
- Products are available while stocks last.
- Contact your local store to check stock availability.
- Images are for illustration purposes only.
- Price is available to online purchases only.
- Price when purchasing in-store may vary.
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any further reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au.
Specifications
Product Identifiers
- SKU
- 7265739
- APN / GTIN / UPC
- 9312620155161
- Product Code
- 80155161
Product Dimensions
- Height (mm)
- 2400mm
- Width (mm)
- 250
- Depth (mm)
- 250
- Weight (kg)
- 8.7
Product Details
- Brand
- Hills
Battery
- Battery Included
- No
- Battery Required
- 0
- Skin Only
- No
Warranty & Care
- Care Instructions
- Installation Instructions Installing directly into a concrete pad *Note: Check to ensure that all parts are removed from the carton before beginning installation. The accessory pack may be stored within the Post 2.1 Having selected a suitable location, mark out 2x centre marks spaced at 2353mm for the post hole locations. 2.2 Dig two holes 200mm in diameter x 500mm deep. Place approximately 100mm of coarse gravel in the bottom of the hole. *Note: If you wish for the clothesline to sit lower, dig the hole deeper. 2.3 Insert the Posts into the holes - push the base of the Posts approx. 40mm into the gravel. (Figure 4) 2.4 Loosely fasten the Cross Brace to the top holes in each Post, using two MS x 85 socket head bolts and two Nyloc nuts. This is done to ensure alignment and will be removed to include the Folding Bracket after concrete has set for 48 hours. 2.5 Support the posts and using a spirit level and tape measure, check that the Posts are parallel with each other and level - both vertically and horizontally. 2.6 Concrete should be damp enough to hold together when squeezed in your hand. Support the Posts in position and fill the holes with concrete, packing firmly. 2.7 Settle the concrete by pushing a thin stick into the mix several times. 2.8 Slope the surface of the concrete away from each post to provide drainage Use a spirit level and tape measure to check the posts are parallel and level. (Figure 5) *Note: Allow 48 hours for the concrete to set before use.
- Warranty
- Lifetime
